Thursday, July 24, 2008

Specialized 2009 mountain bikes and bits

By James Huang, technical editor

Tuesday, June 17, 2008

Spring Tune Up Tips

If you don't ride in the winter, you've probably spent the winter months on the couch eating chips and watching television. Before you know it, spring will be here and a new season of mountain biking will begin. Even though your body may not be in shape, these tips will ensure that your bike is.

Before you take your bike out, check the wear and tear on your components and adjust them if its necessary. Start off with your chain. If you haven't replaced it in a year or more, it's time to do so. Over time, the individual parts in the chain will get worn out, increasing its effective length.

As this happens, the chain is no longer able to conform to the cog and the teeth of the chain ring,
so it wears those teeth out to fit the profile of the chain. If you can replace the chain before it stretches too much you'll save yourself from having to replace high priced cogs and chain rings.

Now, check the bearing surfaces. These include your bottom bracket, hubs, and the headset. Each of these should turn without a problem with no play in the system. Before checking the bottom bracket, make sure each cranking arm is snugged tight. Next, hold on to the crank arm (not the pedal) and wobble it back and forth. If you hear any clicking or if the crank arm binds, the bottom bracket needs to be adjusted.

Do the exact same thing with your hubs. Take the wheels off the bike, spin the hub axles, then feel for any free play or binding. If you feel play or binding, you need to make an adjustment. To check the headset, start off by putting the newly adjusted wheels back on the bike.

Now, grab the front brake and pull and push the handle bars back and forth. There shouldn't be any play. If you lift the front end off the ground, the fork should turn very smoothly. If it feels rough, it needs to be either adjusted or replaced.

While your looking, check the condition of your cables and housing. The cables should be rust free and the housing shouldn't be cracked or kinked. If you see any of this you should replace the offending device, as if you don't your shifting and braking will be sluggish.

Last, you should inspect your brake pads. Most pads will have ridges or indicator marks that will let you know when they need to be replaced. Brake pads that are worn out will comprimise both safety and braking efficiency.

Once you've got the tune ups out of the way, it's time to go for a ride. With your mountain bike running better than ever, all you have to do now is have fun!

Setting Your Tire Pressure


Riding your mountain bike with the appropriate amount of tire pressure can make a huge difference in how much control you have over your bike.

Setting your tire pressure too high will make for poor contact with the ground and also make your bike less controllable. Setting your tire pressure too low will make your tires unpredictable and also make them susceptible to pinch flats.

The appropriate amount of tire pressure in a mountain bike will vary between rider to rider and
tire setup to tire setup. The conditions of your trail and the type of terrain your riding will also
greatly impact what tire pressure you should be using in your tires.

The trick here is to find out exactly what mountain bike tire pressure works for you and your setup during normal conditions. After doing this, you can learn to adjust your pressure for different trails and types of terrain as needed.

You should start by finding a reliable pressure gauge or a pump with a pressure gauge. Then, use this same gauge or pump anytime you are making adjustments. A gauge can be very inaccurate, so if you switch around it you can make things much more difficult.

You should start with a higher pressure of around 40 - 50 psi. If you have a tubeless system, you should start lower, 30 - 40 psi. The more you weigh, the higher pressure you should start with. Try this pressure for a while and get a feel for how the tires take corners and loose dirt.

Drop the pressure by 5 psi in each tire and get a feel for how this new setup rides and how it compares to your previous setting. You should notice some improvement in stability, and if you don't, drop the pressure by another 5 psi.

You want to find the lowest pressure you can ride with without sacrificing pinch flat resistance. A pinch flat occurs when your tire rolls over an object then compresses to the point where the tire and the tube get pinched between the object and the rim on the wheel.

With tubeless tire systems, you can run much lower air pressure, as you don't have to worry about getting pinch flats. If you start to dent your rims, burp air out along the bead, or feel the tire roll under the rim during hard cornering, you've taken the pressure much too low.

Once you've found a comfortable setting for your tire pressure, learn what your tire feels like when you squeeze it with your hands. Once you know what your tires feel like you can always get the right air pressure - with any pump.

Mountain Biking Safety Tips

There are numerous ways that you can improve your mountain bike safety. Many riders will tell you that wearing a helmet is the most important step to staying safe. The second most important step is that you should always ride in control of your mountain bike.

By riding in control you'll not only prevent crashes, but keep others on the trail safe as well. When riding out of control you loose the ability to adjust to the terrain as you ride over it. This can and usually does result in serious injury to yourself and others.

Follow these helpful guidelines and you'll remain safe when riding your mountain bike.

Gear
Always make sure that you wear a helmet and other necessary safety gear for the conditions that you plan to ride in.

Never ride beyond your control
There is never any shame in walking the areas of the trail that you don't feel comfortable in riding and you should never let anyone else tell you that there is.

Keep your speed under control
Always make sure you keep your speed at a level where you can quickly adjust to any obstacles or change in the trail.

Knowing your trail
You should never push the limits on trails that you aren't familiar with. You should take trails you aren't familiar with at slow speeds until you learn them better.

Slow down around blind corners
If you can't see past a corner you should always slow down, as you never know who or what is around it.

Start small then go big
Work your way up to stunts or obstacles. Practice in less difficult or dangerous situations before you move up to something more dangerous.

Playing it smart
If you start to question what your doing, you probably shouldn't be doing. Always think about what you are doing and go with your instincts.

Mountain Bike Designs

The designs for mountain bikes can be classified in three categories based on suspension:

  1. Hardtail - A frame with no rear suspension, often containing a front suspension fork.
  2. Fully rigid - This is a sub type of hardtail, with a rigid fork.
  3. Dual or full suspension - These bikes offer a front suspension fork and a rear suspension that are integrated into the frame.
  4. Soft tail - Offers a frame with a small amount of rear suspension, normally less than a full suspension frame.
The different designs of bikes in mountain biking will offer you what you need for your unique style of riding. You'll want a different bike for different terrain, such as cross country or downhill. As the terrain changes, you'll want to make sure you have the right bike for the job.

Mountain biking is different than any other sport, offering you plenty of excitement and thrills.
If you are new to mountain biking, you'll find the different designs to be very enticing yet very challenging at the same time. Each design serves a purpose with mountain biking, even some that excel on the trails.

There are also several other designs which reflect on the manny challenging disciplines in the sport of mountain biking. No matter what type of mountain biking you like to do, there are bikes for that specific discipline.

If you are new to mountain biking, you'll want to check out the many designs and types of biking
before you purchase a bike. Mountain biking can be a lot of fun and excitement, although it can
also be very dangerous if you don't have the right bike for the terrain. Before you decide to buy a bike and hit the trails, make sure you have the right design of mountain bike for the riding you are planning on doing.

Introduction To Mountain Biking

Mountain biking is a great way to explore the outdoors, stay in shape, or just have fun. Racing down the side of a mountain is a lot of fun indeed, although it can also be quite dangerous. Even though it's dangerous, if you ride with caution, it can be enjoyed by the entire family.

Styles of mountain biking
Mountain biking can best be characterized into three different styles - downhill, free riding, and cross country. Even though the different styles are similar in some ways, they still require different skills. The style that you pick will determine the type of bike you get.

Locations for mountain biking
The sport can best be thought of as biking on an unpaved surface. Many areas throughout North America have specific locations designed for mountain biking. Before you decide to go down a trail, you should always check with your local park to get the routes, regulations, and any rules that they may have.

You can also find groups that have mountain bike rides and competitions. You can look on the internet or even in a local paper and see exactly what's available in your area. You may be able to find groups for the more advanced riders as well as beginners.

Becoming a great biker
Endurance and stamina are a must for a great mountain biker. It will also take ambition and practice to succeed as well as conquer the course. Like all other sports, it takes time and practice. Those just beginning will have to get past the bumps and bruises from falling off the bike.

Selecting your mountain bike
The bike you select is more of a personal choice, and a big determining factor on the type of riding you will be doing. Bikes come in all styles, shapes, and prices, which will make selecting one for yourself very difficult indeed.

You should use the internet to help you shop for a bike, even do some price comparisons online as well before you make a purchase. Before you buy a bike, always ask to try it out first. A great mountain biker will become one with his or her own bike. When buying, make sure you check for comfort, how it fits, even how it is geared.

Staying safe when riding
Mountain bike riding on unpaved roads can be very dangerous, as mentioned earlier. Anytime you are riding, you should wear a helmet, along with knee and elbow pads. If you are following a group or riding in the woods you should strongly consider a pair of goggles as well. Safety should be your top priority and never taken lightly anytime you are mountain biking.

How To Lube Your Mountain Bike

A mountain bike is a lot of fun although it does require some maintenance. You should always lube your bike 15 hours or so before riding, as quick jobs right before you take off normally doesn't get everything lubed. Some lube jobs will last for more rides, although if things get loud or shifting gets sticky, it's time to lube.

Here is how to lube your bike:

1. The chain
Apply a generous amount of mountain bike lube to your chain as you move the pedals around backwards. It also helps to find a spot to steady your hand such as the frame while you move the pedals around and around. Make sure you watch out for the cranks and chain rings as they move around.

2. Front Deraileur
On the front defaileur, lube the pivots. Use a spot of lube everywhere you can see movement when you move the shift lever.

3. Rear deraileur
Just like the front deraileur, lube the pivots.

4. Pedals
There are some types of clipless pedals that will need to have the release mechanism lubed. You
should only lube this mechanism if you have this type of pedal.

5. Everything into motion
Pedal around, shift your gears, and bounce your bike around. If you hear anything squeak, there's a moving part there are it should be lubed immediately.

6. Wipe it all clean
Once you've lubed everything and wiped it all around, simply wipe it all back off. Use a rag to wipe away all the lube you used, including all the lube off the chain. Wiping it away will leave the lube in between the parts but clean it away from everywhere it isn't needed. This will keep your bike from collecting dirt while you ride.

 

blogger templates | Make Money Online